MORSE HEF CARBON STEEL BANDSAW BLADE 1385 MM x 6.4 MM x 3 TPI TO FIT BURGESS BS1
Morse Hard Edge Flexback (HEF) band saw blades incorporate a special alloy that offers exceptional fatigue resistance HEF Blades are ideal wood cutting blades suitable for wood production, large workshop and keen hobbyist.
WHY BUY MORSE BLADES ?
Manufactured in Morse’s advance manufacturing plant in the USA. Featuring annealed welds to prevent brittleness. These industrial standard blades have a minimum gauge of 0.025 mm which increases to 0.042 as the width as the blade increases (unlike inferior quality blades using 0.14 mm), this result in a blade that consistently cuts straighter and for longer due to its hardened tooth tips.
Features & Benefits
Manufactured from a single piece of high carbon steel with individually hardened tooth tip
Annealed welds to remove any brittleness and danger of fatigue
Flexible back makes them more fatigue resistant
Low cost per blade/low cost per cut in wood
Can be run at speeds up to 15,000 SFM (surface feet per minute)
Wood Cutting, General Purpose Wood Cutting, Furniture Production, Composition Board, Cork, Plastic, Graphite, Brass, Bronze,